Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.5.1. Coolant
8.5.2. Air filter
8.5.3. Block of the air conditioning system
8.5.4. Evaporator
8.5.5. Broad valve
8.5.6. Condenser
8.5.7. Check of a radiator of a heater
8.5.8. Removal and installation of a back air duct
8.5.9. Removal and installation of the compressor of the air conditioning system
8.5.10. Dismantling and assembly of the obgonny coupling
8.5.11. Adjustment of the obgonny coupling
8.5.12. Check of the obgonny coupling
8.5.13. Removal and installation of the condenser
8.5.14. Check of the condenser
8.5.15. Removal and installation of lines of coolant (LF)
8.6. Tables
 








8-5-7-proverka-radiatora-otopitelya.html

8.5.7. Check of a radiator of a heater

Remove the block of the air conditioning system.
Remove a radiator of a heater of the block of the air conditioning system.
Check for existence of cracks, damages and leak of cooling liquid.
At detection of malfunctions replace a heater radiator.
Check plates for deformation existence.
For elimination of deformation use the screw-driver with flat shliyets.
Make sure that entrance and output branch pipes of a radiator of a heater are not damaged.
If necessary eliminate deformation with flat-nose pliers.

"previous page
8.5.6. Condenser
following page"
8.5.8. Removal and installation of a back air duct