Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.3. Body glazing
8.3.1. Removal of a windshield
8.3.2. Installation of a windshield
8.3.3. External rear-view mirrors
8.3.4. Removal and installation of an external mirror with the electric drive
8.3.5. Dismantling and assembly of an external mirror with the electric drive
8.4. Seats
8.5. Conditioner and heater
8.6. Tables
 








8-3-5-razborka-i-sborka-naruzhnogo-zerkala-s-ehlektroprivodom.html

8.3.5. Dismantling and assembly of an external mirror with the electric drive

Разборка зеркала заднего вида с электроприводом
Fig. 8.51. Dismantling of a rear-view mirror with the electric drive


Press on area A of a mirror so that the area B moved to you (fig. 8.51).
Insert the screw-driver into a groove and take out glass from the mirror basis.

Компоненты зеркала заднего вида
Fig. 8.52. Components of a rear-view mirror: 1 – glass of an external mirror; 2 – socket; 3 – cover; 4 – holder of an external mirror


Remove other components in the order shown in the figure 8.52.

Разборка корпуса зеркала
Fig. 8.53. Dismantling of the case of a mirror


Unbend an ear of the holder of a mirror the screw-driver, press the holder's ear down and disassemble the case (fig. 8.53).

Установка зеркала в корпус
Fig. 8.54. Installation of a mirror in the case


Press a mirror into the case so that the pin was not displaced (fig. 8.54).
Finally collect as it should be, the return to dismantling.

"previous page
8.3.4. Removal and installation of an external mirror with the electric drive
following page"
8.4. Seats