Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.2.1. Removal and installation of a cowl
8.2.2. Adjustment of provision of a cowl
8.2.3. Removal and installation of the panel of a forward wing
8.2.4. Removal and installation of a front bumper
8.2.5. Removal and installation of a rear bumper
8.2.6. Doors
8.2.7. Removal and installation of a forward door
8.2.8. Removal and installation of a back door
8.2.9. Adjustment of a door
8.2.10. Adjustment of a door of a back
8.2.11. Removal and installation of glass of a forward door
8.2.12. Removal and installation of glass of a back door
8.2.13. Removal and installation of the block of a forward door
8.2.14. Removal and installation of the block of a back door
8.2.15. Window regulators
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.6. Tables
 








8-2-13-snyatie-i-ustanovka-bloka-perednejj-dveri.html

8.2.13. Removal and installation of the block of a forward door

Remove glass of a forward door.
Remove the internal handle.
Remove the loudspeaker of a forward door.
Disconnect the window regulator electric motor socket with the servo-driver, the forward socket of the executive mechanism of the lock of a door, the socket of an external mirror.
Remove a door plait from the block of a forward door.
Turn off bolts.
Unscrew the screw.
Take out a hook of the executive mechanism of a forward door from its block.

Снятие блока передней двери
Fig. 8.28. Removal of the block of a forward door


Pull the block of a forward door a little to yourself, without allowing the window regulator regulator to be latched with the servo-driver on it, take out the block from a door (fig. 8.28).
Take out an internal cable of the handle and a cable of the button of the lock of a door from an opening.

Снятие электродвигателя стеклоподъемника
Fig. 8.29. Removal of the electric motor of a window regulator


Remove the window regulator electric motor with the servo-driver and the window regulator regulator with the servo-driver from the block of a door (fig. 8.29).
Establish as it should be, the return to removal.

"previous page
8.2.12. Removal and installation of glass of a back door
following page"
8.2.14. Removal and installation of the block of a back door