Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.2.1. Removal and installation of a cowl
8.2.2. Adjustment of provision of a cowl
8.2.3. Removal and installation of the panel of a forward wing
8.2.4. Removal and installation of a front bumper
8.2.5. Removal and installation of a rear bumper
8.2.6. Doors
8.2.7. Removal and installation of a forward door
8.2.8. Removal and installation of a back door
8.2.9. Adjustment of a door
8.2.10. Adjustment of a door of a back
8.2.11. Removal and installation of glass of a forward door
8.2.12. Removal and installation of glass of a back door
8.2.13. Removal and installation of the block of a forward door
8.2.14. Removal and installation of the block of a back door
8.2.15. Window regulators
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.6. Tables
 








8-2-12-snyatie-i-ustanovka-stekla-zadnejj-dveri.html

8.2.12. Removal and installation of glass of a back door

Completely lower glass of a back door down.
Remove an overlay of a back door.
Remove a cap.
Pull a sealant of a back door and remove the screw.
Turn off a bolt.

Компоненты, демонтируемые перед снятием заднего стекла
Fig. 8.26. The components dismantled before removal of back glass


Remove a guide of lowering glass from the back door (fig. 8.26) directing to glasses.
Lift glass of a back door to situation when we see the screw of glass of a back door.
Unscrew the screw.

Снятие стекла задней двери
Fig. 8.27. Removal of glass of a back door


Implant a hand into an opening of the block of a back door and take out glass (fig. 8.27).
Establish as it should be, the return to removal.

"previous page
8.2.11. Removal and installation of glass of a forward door
following page"
8.2.13. Removal and installation of the block of a forward door