Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of the parking brake system
6.2.15.1. Adjustment of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








6-2-15-proverka-stoyanochnojj-tormoznojj-sistemy.html

6.2.15. Check of the parking brake system





Контур стояночной тормозной системы
Fig. 6.56. Contour of the parking brake system: 1 – switch of the parking brake system; 2 – adjusting nut; 3 – lever of the parking brake; 4 – clip; 5 – cables of the parking brake system


Extend the lever of the parking brake (fig. 6.56) several times.
Press a brake pedal several times.
Check the course of the lever of the parking brake system at a tension of the lever of the parking brake with a strength equal of 98 N.
Piston stroke – 3–6 clicks.

"previous page
6.2.14.2. Installation
following page"
6.2.15.1. Adjustment of the parking brake system