Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.10.1. Check of operation of the vacuum amplifier
6.2.10.2. Tightness check
6.2.10.3. Check and adjustment of length of the speaker of a rod
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








6-2-10-proverka-vakuumnogo-usilitelya-tormozov.html

6.2.10. Check of the vacuum amplifier of brakes




Operation of the vacuum amplifier of brakes located on a motor board is based on use of depression of an inlet collector and pressure of atmospheric air. After completion of each operation including removal of any of elements of the brake system make a control trip for check of work of brakes of the car. Check brakes at the movement on the pure, dry and flat road. Other test conditions can result in inexact results. Check brakes at various speeds, both at low, and at big load of brakes. The car has to stop evenly, without withdrawal aside. Avoid blocking of brakes as tires are as a result damaged and efficiency and controllability when braking decreases.
Work of brakes is also influenced by a condition of tires, loading of the car and the angles of installation of forward wheels.

"previous page
6.2.9.2. Installation
following page"
6.2.10.1. Check of operation of the vacuum amplifier