Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.1.1. Adjustment of angles of installation of wheels
4.1.2. Adjustment of an angle of rotation of forward wheels
4.1.3. Adjustment of installation of back wheels
4.1.4. Balancing of wheels (16-inch and 17-inch cast light-alloy wheels)
4.1.4.1. The glued balance weight (external)
4.1.4.2. Installation of freight of usual type (internal)
4.1.4.3. Check of size of a residual imbalance
4.2. Suspension bracket
4.3. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








4-1-4-1-kleyashhijjsya-balansirovochnyjj-gruz-vneshnijj.html

4.1.4.1. The glued balance weight (external)

Remove an old balance weight of a wheel.
Remove the bilateral adhesive tape which remained on a wheel, then clear and degrease the contact platform.
Establish a wheel on the machine for balancing of wheels, measure the size and the provision of an imbalance in the mode for usual balance weights.

Fig. 4.7. Scheme of installation of a balance weight


You will increase imbalance size on 1,6 to receive value of mass of a balance weight (fig. 4.7).
Choose a balance weight, the closest on weight, establish a balance weight in the situation (outside) specified by the machine for balancing of wheels.
Example of calculation of mass of freight for the set imbalance size:
23 g ґ 1,6 = 36,8 g.
Necessary mass of freight: 35 g.

NOTE
Use freight the weight close to settlement.
Example: 32,4 g = 30 g, 32,5 g = 35 g.

ATTENTION
Use an original counterbalance or equivalent (steel).
At installation of a balance weight press it during 2 with with a force of 25 N on each 5 g.


Fig. 4.8. Scheme of installation of two balance weights


At installation of two freights place them so that they settled down on both sides of a rim in the situation specified by the machine for balancing of wheels (fig. 4.8).

ATTENTION
– Do not row freights.
– Do not impose freights at each other.
– Total weight should not exceed 160 g.


"previous page
4.1.4. Balancing of wheels (16-inch and 17-inch cast light-alloy wheels)
following page"
4.1.4.2. Installation of freight of usual type (internal)