Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.1.1. Adjustment of angles of installation of wheels
4.1.2. Adjustment of an angle of rotation of forward wheels
4.1.2.1. Adjustment of a convergence of wheels
4.1.3. Adjustment of installation of back wheels
4.1.4. Balancing of wheels (16-inch and 17-inch cast light-alloy wheels)
4.2. Suspension bracket
4.3. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








4-1-2-regulirovka-ugla-povorota-perednikh-koles.html

4.1.2. Adjustment of an angle of rotation of forward wheels




Adjustment of an angle of rotation
Weaken a lock-nut of a steering rod end of draft.
Remove a lath cover collar.
Rotating steering draft, adjust an angle of rotation.

NOTE
The course of the right and left steering draft has to be identical.


Вращение рулевых тяг
Fig. 4.2. Rotation of steering drafts


Rotating steering draft, achieve that the difference between the size L shown in the drawing was less norm (fig. 4.2) on the right and at the left.
Standard: 3 mm or are less
Tighten a lock-nut of a tip of steering draft.
Inhaling moment: 68,6–98,0 N · m.
Eliminate twisting of a cover of a lath.
Establish and fix a lath cover collar.
After adjustment of an angle of rotation, always check and regulate a convergence corner.

"previous page
4.1.1.1. Preliminary check of adjustment of installation of wheels
following page"
4.1.2.1. Adjustment of a convergence of wheels