Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.1.1. Adjustment of angles of installation of wheels
4.1.1.1. Preliminary check of adjustment of installation of wheels
4.1.2. Adjustment of an angle of rotation of forward wheels
4.1.3. Adjustment of installation of back wheels
4.1.4. Balancing of wheels (16-inch and 17-inch cast light-alloy wheels)
4.2. Suspension bracket
4.3. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








4-1-1-1-predvaritelnaya-proverka-regulirovki-ustanovki-koles.html

4.1.1.1. Preliminary check of adjustment of installation of wheels

Check pressure in tires, bring pressure in them to norm.
Check a gap in bearings of forward wheels and adjust it if necessary.
Check a beating of the tire and a wheel.
Check spherical hinges and the steering drive for existence of excessive gaps.
Shake the car for check of operation of shock-absorbers.

NOTE
The car has to be unloaded. Fill completely fuel tank and put it on a horizontal plain surface.

Levels of cooling liquid of the engine and engine oil have to be normal.
The spare wheel, jack and the tool – are on regular places.
Measure height from the center of a wheel to edge of a wing.
The difference between result of measurement should not exceed 10 mm at the left and on the right.

Fig. 4.1. Scheme of preliminary check of angles of installation of wheels



"previous page
4.1.1. Adjustment of angles of installation of wheels
following page"
4.1.2. Adjustment of an angle of rotation of forward wheels