Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.4.1. General information
3.4.2. Forward power shafts
3.4.3. Removal and installation of a nave of a forward wheel
3.4.3.1. Removal
3.4.3.2. Installation
3.4.4. Removal and installation of a nave of a back wheel
3.4.5. Removal and installation of a nave of a back wheel
3.4.6. Removal and installation of a forward connecting shaft
3.4.7. Assembly and dismantling of a connecting shaft
3.4.8. Removal and installation of a power shaft (cars with the mechanical transmission)
3.4.9. Removal and installation of a power shaft (cars with the automatic transmission)
3.4.10. Removal and installation of a power shaft (cars with the mechanical transmission)
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








3-4-3-2-ustanovka.html

3.4.3.2. Installation

Установка новых болтов ступицы
Fig. 3.110. Installation of new bolts of a nave


By means of a press establish new bolts of a nave (fig. 3.110).

Выравнивание меток на новом защитном кожухе и поворотном кулаке
Fig. 3.111. Alignment of tags on the new protection cover and a rotary fist


Establish a casing on a rotary fist. Level tags on the new protection cover and a rotary fist (fig. 3.111).

Установка нового защитного кожуха
Fig. 3.112. Installation of the new protection cover


By means of special devices install the new protection cover (fig. 3.112).

Установка нового колесного подшипника ступицы
Fig. 3.113. Installation of the new wheel hug bearing


By means of special devices install the new wheel hug bearing (fig. 3.113).

Установка ступицы
Fig. 3.114. Installation of a nave


By means of special devices establish a nave (fig. 3.114).

Установка новой контргайки ступицы
Fig. 3.115. Installation of a new lock-nut of a nave


Establish a new lock-nut and stop it, as shown in the figure 3.115.

"previous page
3.4.3.1. Removal
following page"
3.4.4. Removal and installation of a nave of a back wheel