Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.9.1. Removal and installation of system of an admission
2.9.2. Removal and installation of the regulator of idling
2.9.3. Removal and installation of a pedal of management of fuel supply
2.9.4. Check and adjustment of a cable of the drive of a butterfly valve
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








2-9-4-proverka-i-regulirovka-trosa-privoda-drosselnojj-zaslonki.html

2.9.4. Check and adjustment of a cable of the drive of a butterfly valve

Make sure that the butterfly valve is completely closed.

Регулировка троса привода дроссельной заслонки
Fig. 2.317. Adjustment of a cable of the drive of a butterfly valve


Move a cable of the drive of a butterfly valve in the A and B directions, and check compliance of a gap of a cable of the drive of a butterfly valve to norm (fig. 2.317).
If the gap does not meet standard, adjust a cable gap a lock-nut of C.
Standard: 1,0–3,0 mm.
Inhaling moment: 9,8–14,7 N · m.

"previous page
2.9.3.2. Installation
following page"
2.10. Fuel system