Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.13.1. Removal and installation of the sensor of temperature of cooling liquid of the engine
2.13.2. Removal and installation of the sensor of provision of a bent shaft
2.13.3. Removal and installation of the sensor of provision of a butterfly valve
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








2-13-sistema-upravleniya.html

2.13. Control system





Компоненты системы управления автомобиля с двигателем Z6
Fig. 2.340. Car control system components with the Z6 engine: 1 – PCM block; 2 – neutral switch; 3 – the CPP switch (Models with the mechanical transmission); 4 – sensor of pressure of the hydraulic booster of the steering mechanism; 5 – sensor of temperature of cooling liquid; 6 – the air temperature sensor on an admission; 7 – sensor of position of the crankshaft; 8 – sensor of provision of a cam-shaft; 9 – sensor of provision of a butterfly valve; 10 – sensor of a mass consumption of air; 11 – the forward sensor of concentration of oxygen with heating; 12 – the back sensor of concentration of oxygen with heating; 13 – sensor of barometric pressure; 14 – KS


Car control system components with the Z6 engine are shown in fig. 2.340.

"previous page
2.12.2. Check of the coil of ignition with the built-in switch of food
following page"
2.13.1. Removal and installation of the sensor of temperature of cooling liquid of the engine