Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.2. System of passive safety
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Evacuation of the car
1.4.4. General information and security measures at control survey and maintenance of the car
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and interior of the car
1.4.6.1. Protection against corrosion
1.4.6.2. Prevention of corrosion
1.4.6.3. Sink and putting wax paste
1.4.6.4. Removal of spots
1.4.6.5. Polishing and putting wax paste
1.4.6.6. Repeated putting wax paste
1.4.6.7. Care of bumpers
1.4.6.8. Cleaning of interior of the car
1.4.6.9. Cleaning of an upholstery from genuine leather (the additional equipment)
1.4.6.10. Cleaning of carpets
1.4.6.11. Cleaning of seat belts
1.4.6.12. Sink of glasses
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








1-4-6-7-ukhod-za-bamperami.html

1.4.6.7. Care of bumpers

At care of bumpers of the car observe precautionary measures.
Be accurate, do not allow hit of electrolyte of the rechargeable battery or brake fluid on bumpers. If it occurred, immediately wash up bumpers clear water.
Be accurate when cleaning surfaces of a bumper. They are made of soft plastic, and their surface can be damaged at maloperation. Do not use abrasive cleaners. Use warm water and the weak neutral washing solution or solution for a car wash.
Do not subject bumpers to influence of high temperatures. For example, when coloring the car in the high-temperature drying camera surely remove bumpers from the car.

"previous page
1.4.6.6. Repeated putting wax paste
following page"
1.4.6.8. Cleaning of interior of the car