Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.2. System of passive safety
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Evacuation of the car
1.4.4. General information and security measures at control survey and maintenance of the car
1.4.4.1. Check of level of engine oil
1.4.4.2. Check of level of cooling liquid
1.4.4.3. Check of level of working liquid in a tank of the steering hydraulic booster
1.4.4.4. Check of level of working liquid of automatic transmission
1.4.4.5. Check and adjustment of the parking brake
1.4.4.6. Check of an axial side play of a steering wheel
1.4.4.7. Replacement of an oil filter
1.4.4.8. Replacement of engine oil
1.4.4.9. Check of level and replacement of oil in MKPP
1.4.4.10. Check of level of liquid of washers of glasses and headlights
1.4.4.11. Lubricant of frictional units on a car body
1.4.4.12. Replacement of the filtering air cleaner filter element
1.4.4.13. Replacement of brushes of screenwash
1.4.4.14. Service of the rechargeable battery
1.4.4.15. Check of level of electrolyte
1.4.4.16. Charge of the rechargeable battery
1.4.4.17. Check of pressure of air in tires
1.4.4.18. Periodic shift of wheels
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and interior of the car
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








1-4-4-4-proverka-urovnya-rabochejj-zhidkosti-avtomaticheskojj-transmissii.html

1.4.4.4. Check of level of working liquid of automatic transmission

It is regularly necessary to check the level of working liquid of automatic transmission. You carry out an inspection as follows.
The volume of working liquid changes depending on temperature. Check the level of working liquid during the operation of the engine idling and the normal temperature of liquid.

ATTENTION
Insufficient level of working liquid causes slipping of frictional elements of automatic transmission. Too high level of liquid can cause intensive foaming, loss of working liquid and violation of normal functioning of automatic transmission.
Use only the recommended working liquid. Use of any unrecommended working liquid can lead to violation of normal functioning and failure of automatic transmission.


1. Install the car on the flat horizontal platform and turn on the parking brake.
2. Start the engine and press a brake pedal.
3. Serially transfer the lever of the switch of ranges to all provisions and then establish it in situation "P" (parking).

Fig. 1.175. Check of level of working liquid of automatic transmission


4. In operating time of the engine idling take out the control probe of automatic transmission and wipe it dry. Then insert the probe into place. Again take out the control probe. Normal level of working liquid corresponds to range between tags on the control probe, see the figure 1.175.

"previous page
1.4.4.3. Check of level of working liquid in a tank of the steering hydraulic booster
following page"
1.4.4.5. Check and adjustment of the parking brake