Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.2. System of passive safety
1.3. Use of the car to destination
1.3.1. Launch of the engine
1.3.2. Control of the mechanical transmission
1.3.3. Control of the automatic transmission
1.3.4. System of course stability of the car (cruise control)
1.3.4.1. Inclusion / switching off control cruise
1.3.4.2. Parameter setting of the stabilized speed
1.3.4.3. Increase in the stabilized speed
1.3.4.4. Decrease in the stabilized speed
1.3.4.5. Switching off of system cruise control
1.3.5. Protivobuksovochny system (TCS)
1.3.6. Antistrange system (DSC)
1.3.7. Stabilization of a back suspension bracket
1.3.8. Traction coupling device
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








1-3-4-2-ustanovka-znacheniya-stabiliziruemojj-skorosti.html

1.3.4.2. Parameter setting of the stabilized speed

1. Include system a cruise control, having pressed the main ON/OFF switch.
2. Accelerate the car to the required speed (not less than 30 km/h).
Press and release the SET/COAST switch at a car speed which is required to be supported. At the same time release an accelerator pedal.
Do not hold the switch in the pressed situation. Otherwise, if the driver does not press an accelerator pedal, the speed of the car will decrease until the button of the switch is not released. At the same time you can pass the required speed.

NOTE
The SET function of installation of the required speed can be included not earlier than through 2 from later pressing the main ON/OFF switch. On an abrupt bias the car can quickly lose speed at the movement on rise or quickly gain speed at the movement on descent.

"previous page
1.3.4.1. Inclusion / switching off control cruise
following page"
1.3.4.3. Increase in the stabilized speed